TurbiTechw2 HR Suspended Solids Sensor
|
General Specification Physical |
|
|---|---|
| Dimensions (hxwxd) | 470 x Ø80 mm |
| Weight | 2.2 kg (inc 10 metres of cable) |
| Protection Class | IP68 |
| Enclosure Material | Black Acetal Co-Polymer |
| Cable Entries | Integral Cable Gland |
| Wetted Parts | Black Acetal, 316 Stainless Steel, Glass, Polyurethane, Nitrile |
| Cable Type | 4 core, 2 Twisted Pair, 9 mm O/D Polyurethane Coated |
| Cable Length | 10 metres standard, 100 metres maximum |
| Service Requirement | Seal Service every 3500 cleans (application dependent) |
| Environmental Data | |
| Operating Temperature | 0 to 50ºC |
| Interface to Monitor | |
| Power Supply | 12 VDC from Monitor |
| Sensor Output | ModTechw², RS485 |
| Measurement Characteristics | |
|---|---|
| Range | 0 - 50,000 mg/l |
| Accuracy | ±5% of reading or 250mg/l whichever is greater |
| Limit of Detection | 250 mg/l |
| Minimum Operating Range | 0 - 5,000 mg/l |
| Measurement Principle | Light Attenuation |
| Wavelength | 860 nm Infrared |
| Pressure Rating (Depth) | 1Bar or 14.5 psi |
| Flowrate | Not affected by flowrate, avoid deadspots and extreme turbulence |
| Units | FAU, mg/l, ppm, g/l, %SS, User Defined |
| The actual measuring range for Suspended Solids will depend on the nature of sample being monitored and cannot be guaranteed. | |
