With digital control over all parameters (time, temperature and pressure) the SmartSeal is capable of accepting a wide range of plate types and heights. An aluminum block adapter is included (for assay and PCR plates) increasing the compatibility of the instrument to allow for sealing nearly any plate up to 48mm tall.
With sealing times as low as 5 seconds, the SmartSeal is a time saving solution for labs and production facilities requiring high quality and consistent plate sealing.
Compatible with:
- Deep well (storage) plates up to 48mm tall
- Assay plates
- PCR Plates (skirterd, semi-skirted and non-skirted)
- Polypropylene polystyrene or Polyethylene plates
- Foil or polymer (transparent) seals
Specifications
Model |
Accuris SmartSeal™ |
Temp. Range: |
80°C to 200°C |
Temp. Heat Up: |
6 minutes to reach 200°C |
Temp. Accuracy: |
1°C |
Sealing Time: |
0.5 sec. to 10 sec. (0.1 sec. increments) |
Max. Plate Height: |
48mm |
Dimensions |
17.8 x 37 x 33 cm / 7 x 14.6 x 13 in. |
Weight: |
9.5 kg / 21 Lbs |
Electrical: |
115V or 230V, 50-60Hz, 300W |
SmartSeal Films
- Foil or optically clear films
- Strong thermal bond
- Piecreable and peelable options
- For use with Accuris SmartSeal and other semi-automated thermal plate sealers
The Accuris SmartSeal films are designed for quick and easy sealing of multiwell plates in semi-automated thermal plate sealers. Foil films are ideal for long term storage of samples in polypropylene plates. Able to withstand DMSO and other solvents, the films can be used in freezers and incubators, from -200°C to 110°C. The optically clear films are ideal for use with qPCR and ELISA samples and are compatible with most plate types, including polypropylene, polycarbonate and polyethylene. Peelable, pierceable and strong bonding options are available. Seals are supplied as individual 125x78mm sheets in packs of 100.
