SBS-CH4 METHANE GAS DETECTOR
Download Files
SBS-CH4-Methane-Instruction-Manual.pdf (1.01 MB)
SBS-CH4-Methane-DataSheet.pdf (901.58 KB)
SBS-CH4-Methane-Instruction-Manual.pdf (1.01 MB)
SBS-CH4-Methane-DataSheet.pdf (901.58 KB)
Methane Sensor and Monitoring System
Benefits
- Protects life, property and company profits
- Ideal for remote locations
- Fail safe mode in event of loss of power
- Up to three (3) sensors can be installed to main control to meet space coverage requirements
Features
- Universal power inputs: 110/220 Vac and/or 12–48 Vdc input
- Strobe light for visual alerts
- Sensor status indicator LEDs on the main control
- Modular design for optimal placement of sensor(s)
Installation
- Wall or 2-gang junction box mountable
-
Mechanical relays are easily accessible:
- Warning 25% relay, 15 A @ 120 Vac; 10 A @ 277 Vac; 10 A @ 28 Vdc
- Alarm 50% relay, 0.5 A resistive @ 28 Vdc, 0.5 A @ 125 Vac
- Redundant power supply capability; dual AC and/or DC power supply connections (DC power supply will operate as backup power source)
- Indicator LEDs can be tested by pushing the red “TEST” button
- Sensors can be tested in the field with the P/N CH4-TESTKIT
Detector can operate exhaust fans and building alarms / SCADA systems:
Warning Settings: Should the concentration of methane gas in the air surrounding the sensor reach 25%LEL by volume, the “25%LEL Warning” yellow LED will light up on the main control of the unit. In addition, the 25%LEL internal relay will energize and can be used to activate an external exhaust fan.
Alarm Settings: Should the methane gas concentration reach 50%LEL by volume, the “50% Alarm” red LED will light up, the strobe will flash and an audible alarm will sound. In addition, the 50%LEL internal relay will energize and can be used to activate a building management/alarm system (via SCADA/Modbus).
SBS-CH4 Includes
- Main unit
- Methane sensor
- 25 ft. cable
Specification
Power Supply(s) |
110/220 Vac, 50/60 Hz and/or 12–48 Vdc (9–58 Vdc operating voltage) |
Leak Detection | Methane |
50% LEL (Lower Explosive Limit) | Dry contacts rated 0.5A/28 Vdc |
Dimensions | 4.7'' L x 4.7'' W x 1.2'' D (main control) |